IKEA SVÄVANDE Manual Del Usuario página 5

Ocultar thumbs Ver también para SVÄVANDE:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
ENGLISH
Product description
Control panel
BUTTON FUNCTION
Turns the motor on/off at speed one.
Attention: the product is with the filter alarm disabled.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the grease filter
Speed
alarm on. LED (B) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds. The relevant LED (B) flashes once.
Turns the motor on at speed two / Activate charcoal filter alarm.
Attention: the product is with the filter alarm disabled.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the Activated
Speed
Charcoal Filter alarm on. LED (A) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds.The relevant LED flashes once (A). Only for
recirculation mode.
Turns the Motor on at speed three / Reset alarm grease filter saturation.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to reset the
Speed
grease filter saturation alarm or charcoal filter alarm. LED (A) flashes three times.
Turns the motor on at Booster speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to the speed that was set
=
before. If it is activated with the motor turned off, it will switch to OFF at the end of the time. To deactivate it, press button
Speed
D or press button A.
=
Press briefly: Turns the lighting system on and off at maximum intensity.
Press and hold to change the lighting intensity up or down.
Light
Filters Alarm
When the filter alarm is activated, the following messages will appear over time:
Grease filter alarm must be cleaned: "A" key flashes once per second.
Anti-odour filter alarm must be cleaned: "A" key flashes twice per second.
Once the filters have been regenerated reset the alarm signal.
Upper chimney
Lower chimney
Hood body
LED Lighting
Grease filter
Control panel
5
loading

Este manual también es adecuado para:

403.890.89