Concept PO2020 Manual De Instrucciones página 30

EN
OPERATING INSTRUCTIONS
Function:
Relaxing beauty therapy treatment. Alternating between hot and cold. It
relaxes, soothes, helps to absorb care preparations.
Modes:
Hot / Hot + vibrations (42 °C)
The heat relaxes the facial muscles and opens the pores. It helps to better
absorb care preparations.
Cool / Cool + vibrations (6 °C)
Closes the pores and soothes the skin.
Control:
Hot mode - Press and hold the main button for 3 seconds, you will hear
a beep and the light indicator will light up.
Hot mode + vibrations - Press the main button again (briefly), you will hear
a beep and the light indicator will light up.
Cool mode - Switch on the device by pressing and holding the main button
for 3 seconds, then briefly press the button twice, you will hear a beep and
the light indicator will light up.
Cool mode + vibrations - Switch on the device by pressing and holding the
main button for 3 seconds, then briefly press the button three times, you
will hear a beep and the light indicator will light up.
Switching off - Press and hold the main button for 3 seconds, or the device
automatically switches off after two minutes.
Charging:
Insert the device into the induction charger.
Low battery - the Cool mode light indicator is flashing.
Fully charged - all three light indicators light up.
58
INSTRUCTIONS FOR USE
Daily care
1. Remove makeup
and cleanse your
skin.
4. Gently move the
work surface of the
device over your
face and neck using
upward and outward
motions.
Intensive care
For intensive care, apply a rinse-free mask to cleansed skin and follow steps
3-6 described above (daily care).
PO2020 PO2020
2. Apply a care 3. Switch on the
preparation to your device and select the
face and neck (cream, Hot mode or the Hot
serum...). + vibrations mode.
5. The appliance 6. Gently move the
switches off work surface of the
automatically after two device over your skin
minutes. Switch on the using upward and
device and select the outward motions.
Cool mode or the Cool
+ vibrations mode.
EN
59