Idiomas disponibles
Idiomas disponibles
• This foot warmer must not be used to keep animals warm.
• Do not use this foot warmer with shoes.
• Do not insert needles.
• Only use in dry rooms.
• Do not use if wet.
• Use only the original power supply provided Type:
EU: KL-AD3060VA
GB: RSS1006-240120-W3U-B-C
AU: RSS1006-240120-W2A-B
• The electrical and magnetic fields emitted by this foot warmer may
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this foot warmer.
• Do not pull, twist or make sharp bends in the cables.
• Please check this foot warmer frequently for signs of wear and tear
or damage.
If any such signs are evident, if the foot warmer has been used
incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.
• If the cables of the foot warmer are damaged, they must be replaced
by the manufacturer, its customer service department or a similarly
qualified person to avoid any risk.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
• If you should have any questions about using our devices, please
contact Customer Services.
3. Intended use
WARNING
This product is intended for warming and massaging human feet. Do not use the foot warmer
with shoes, as they reduce your perception of heat and dirty the foot warmer. This foot warmer
is not designed for use in hospitals or commercial use. The following groups in particular must
not use the device: infants, small children, vulnerable persons, persons with low sensitivity to
heat or animals. Otherwise, there is a risk of injury.
4. Operation
4.1 Initial use
• Connect the mains part cable to the foot warmer controller.
• Insert the mains part into the socket.
10
Capítulos
