Cleaning And Maintenance; Accessories And Replacement Parts - Beurer SL 40 Instrucciones De Uso

9. Cleaning and maintenance

WARNING
• Do NOT clean the control unit and the anti snore belt in the washing
machine!
• Always remove the control unit from the anti snore belt before cleaning.
• Clean the control unit with a slightly damp cloth. If it is very dirty, you
can also moisten the cloth with a mild soapy solution.
• Once you have removed the control unit from the anti snore belt, you
can wash the anti snore belt in lukewarm water. Use a mild soapy solu-
tion or liquid detergent for this. Do not use bleach.
• Do not use any chemical or abrasive cleaning agents for cleaning.
• Do not drop the control unit.
• Ensure that no water enters the control unit. If this should happen, only
use the control unit again once it has fully dried out.

10. Accessories and replacement parts

For accessories and replacement parts, please visit www.beurer.com or
contact the corresponding service address in your country (according
to the service address list). Accessories and replacement parts are also
available from retailers.
Designation
1 x control unit
1 x anti snore belt
1 x extension belt
Item number and/or order number
164.204
164.205
164.206
33