Bosch Professional GLI 18V-2200 C Manual Original página 11

Deactivate the wireless interface, e.g. for transport.
u
To switch off the wireless interface, remove the button
cell and battery.
Before switching on the cordless worklight using the
u
Bosch application, ensure that you have visual contact
with the cordless worklight and that you have taken
all safety precautions.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
This cordless worklight is not intended for use by chil-
u
dren and persons with physical, sensory or mental lim-
itations or a lack of experience or knowledge. This
cordless worklight can be used by children aged eight
or older and by persons with physical, sensory or men-
tal limitations or a lack of experience or knowledge if
a person responsible for their safety supervises them
or has instructed them in the safe operation of the
cordless worklight and they understand the associ-
ated dangers. Otherwise, there is a danger of operating
errors and injuries.
Do not allow children to use the cordless worklight. It
u
is intended for professional use. Children can uninten-
tionally blind themselves or other persons.
Product Description and
Specifications
Intended Use
The cordless worklight is intended for mobile illumination in
a limited space and for a limited time in indoor and outdoor
areas and is not suitable for general room lighting.
The cordless worklight is dust-proof and splash-proof due to
its special battery cover.
Bluetooth® enables the cordless worklight to be operated us-
ing the "Bosch Toolbox" app.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Locking mechanism of the battery cover
(3) Battery cover
(4) Lamp head
(5) Stand
(6) Heat sink
(7) 5/8" tripod mount
(8) Carrying handle
(9) Screw for battery compartment cover
(10) Battery compartment cover
(11) Button cell
(12) Battery compartment
a)
(13) Battery release button
Bosch Power Tools
a)
(14) Battery
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless worklight
Article number
Rated voltage
A)
Lighting duration , approx.
Total luminous flux, max.
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
B)
ure during operation and
during storage
Button cell
Recommended rechargeable
batteries
Recommended chargers
C)
Protection rating
Data transfer
D)
Bluetooth®
E)
Signal range
Frequency range used
Output power
A) At maximum brightness incl. remaining operating time in
dimmed mode
B) Limited performance at temperatures < 0 °C
C) Applies only when battery cover is closed and locked
D) The mobile terminal devices must be compatible with
Bluetooth® Low Energy devices (version 4.1) and support the
Generic Access Profile (GAP).
E) The signal range may vary greatly depending on external condi-
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
The colour rendition of illuminated objects can be distorted.
System requirements
Mobile device (tablet, smart- Android, iOS
A)
phone)
A) Minimum system requirements can be found in the app store for
your mobile device (e.g. Google Play or iTunes).
English | 11
GLI 18V-2200 C
3 601 D46 5..
V= 18
min/Ah 44
lm 2200
°C 0 to +35
°C –20 to +50
V 3
type CR 2032
GBA 18V...
ProCORE18V...
(max. 8.0 Ah)
GAL 18...
GAX 18...
GAL 36...
IP 64
(dust-proof and
splash-proof)
Bluetooth® 4.1
(Low Energy)
m 15
MHz 2402–2480
mW < 2
1 609 92A 6TX | (01.09.2021)