To Grease De Gearbox - Garland BEST 100 DPE Manual De Instrucciones

8.1.1. GENERAL MAINTENANCE
- Check the state of the cable looking for possible
wear and tear or possible cuts to the cable.
- Check that the cutting element is correctly
attached to the transmission. Tighten the cutting
element if necessary.
- Check the cutting sharpness of the cutting
element. Sharpen or substitute the cutting element
when necessary. We recommend that these tasks
are carried out by the after sales service dealer.
8.1.2. CLEANING
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result in
damages to the machine and the machine will work
less.
Attention! The cutting disc is sharp and could
cause damages. Use protection gloves when cleaning
the machine.
Wherever possible, clean the machine immediately
after working with it.
To remove the dirt and any other materials, use a
brush or a dampened cloth.
Clean the ventilation windows and to remove the dirt
and any other materials, use a brush or a dampened
cloth.
8.2. PERIODIC MAINTENANCE
Carry out periodic inspections on the machine to
ensure its adequate and efficient use. Once, each
season take the machine to your nearest after sales
service for a complete maintenance.
Clean the machine and the ventilation windows.
Always use original spare parts so as to achieve
the best performance from the product and to avoid
possible damages and risks to the machine and the
users. The spare parts should be purchased in the
after sales dealers. The use of non original spare parts
can cause accidents, personal damages and breakage
of the machine.

8.2.1 TO GREASE DE GEARBOX

35/120
English
8 h
each
8 hours