Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Hold the rear handle and fully tilt the engine until the tilt support lever locks automatically.
If equipped, you must first lift the tilt control lock.
Tilting it down
1. Tilt the outboard slightly.
2. Slowly tilt the outboard down while pulling the tilt lever from the grab bar up.
3. Loosen the steering friction adjustment by turning counterclockwise, and adjust steering
friction according to operator preference (See according to your engine model).
ATTENTION
If there is too much resistance, it can make it difficult to guide and can cause an accident.
SAILING IN SHALLOW WATERS
To use the outboard in shallow water, this should be used partially elevated.
WARNING
The cooling water intake hole should not be above the surface line of the river / sea water when
navigating shallow water. Otherwise, severe damage may occur due to engine overheating
22
Tabla de contenido
