Tabla de contenido
3. Hold down the "SET" key and
release
it
indicator blinks for three times. The
operation indicator is on and it is
now the code entering state.
Indication light is on
5. The indicator will be off after the
code is entered. If the operation
indicator is on after blinking for
three times, the code entered is
wrong and should be reentered.
Indication light is off
18
after
the
operation
4. Enter the 5 - digit code you
searched out, as figure:
6.
You can check whether the
function
keys
on the
controller
are
operation (such as power, menu and
other keys). If they are under normal
operation, the setup is successful. If
they are not under normal operation,
please repeat steps 1-6.
remote
under
normal
Hide quick links:
Tabla de contenido
