Cleaning The Glass Cooktop - GE PSS93 El Manual Del Propietario

Cleaning the Glass Cooktop

Normal Daily Use Cleaning
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it
with a ceramic cooktop cleaner. This helps protect the
glass cooktop and makes cleanup easier.
2. Regular use of a ceramic cooktop cleaner will help
keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
ceramic cooktop cleaner directly to the cooktop.
Burned-On Residue
NOTE:
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner on
the entire burned residue area.
cooktops, rub the residue area, applying pressure as
needed.
4. If any residue remains, repeat the steps listed above
as needed.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of ceramic cooktop cleaner on the entire burned residue
remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
22
scratching cleaning pad for
ceramic cooktops to clean
the entire cooktop surface.
towel to remove all cleaning
residue. No need to rinse.
metal parts located next to
the glass.
NOTE: It is very important that
until it has been cleaned thoroughly.
5. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
ceramic cooktops.
The ceramic cooktop scraper and all recommended supplies are
available through our Parts Center. See the Accessories and Consumer
Support sections at the end of this manual.
NOTE:
Ceramic
Cooktop
Cleaner
Clean your cooktop after each
cleaner.
49-2000723 Rev. 0