Specific Safety Instructions - stayer DS 125 Manual De Instrucciones

This item is designed to saw all material without changing the
saw blades. It makes smoother, cleaner cuts with less vibration
and kickback then any other single blade saw.
Read this manual and general safety instructions
carefully before using the appliance, for your own
safety. Your power tool should only be passed on
together with these instructions.
1. Contents

2. Specific safety instructions ................................... 14

3. Instructions for use ................................................ 14
3.1 Placement tool ................................................................. 14
3.2 Assembly ...................................................................... 14
3.3 Ilustrated description .................................................... 14
4. Operating instructions ........................................... 15
4.1 Placement and Testing ................................................. 15
4.2 Tool change .................................................................. 15
4.3 Setting operations......................................................... 15
4.4 General instructions for use.......................................... 15
4.5 Troubleshooting ............................................................ 15
5. Maintenance and service instructions ................. 15
5.1 Cleaning ....................................................................... 16
5.2 Repair service............................................................... 16
5.3 Warranty ....................................................................... 16
5.4 Disposal and recycling.................................................. 16
6. Regulations ............................................................. 16
6.1 Technical Data .............................................................. 16
6.2 EU declaration of conformity ........................................ 16
2. Specific safety instructions
- Always keep one hand on the auxiliary handle and the
other on the motor housing.
- Keep your body positioned to either side of the saw blade,
but not in line with the saw blade.
- Do not reach under the material being cut.
- Do not attempt to remove cut material when the blade is
running.
- Never clamp or tie the lower guard into the open position.
- Do not use any abrasive wheels.
- The lower guard should be retracted manually only for
making special cuts such as 'pocket cuts' and 'compound
cuts'.
- Never hold the piece being cut in your hands or across
your leg.
- Never attempt to operate saw with only one blade. Kickback
will occur and send the saw towards you resulting in
serious enjury.
english
14
Symbols
In this manual and/or on the machine the following symbols are
used:
Denotes risk of personal injury or damage to the
tool.
Read manual before use.
In accordance with essential safety standards of
applicable European directives.
page
Class II - The machine is double insulated; earth
wire is therefore not necessary.
Wear noise protection, eye protection and mask In
dusty conditions.
Wear gloves.
3. Instructions for use
3.1 Placement tool
Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
Make sure that the workpiece securely and controlling the
machine with both hands.
3.2 Assembly
The machine comes factory assembled.
You only have to screw the auxiliary handle 2. (Figure A)
3.3 Ilustrated description
1. ON/OFF switch
2. Auxiliary handle
3. Lock switch (on / off)
4. Protective cover
5. Lubricant for metal cutting bar
6. Saw blades
7. Brushes
8. Spindle lock button
9. Spindle
10. Flange
11. Asa opening in the casing
12. Tractor wheel to lubricate the blades
13. Button to rotate handle
14. Lubricant supply hole for cutting metal
15. Carter gear
14