Idiomas disponibles

Idiomas disponibles

YOU MUST INSTALL THE U-HANDLE WHEN USING BRUSH OR CLEARING BLADES. A METAL
SHIELD IS REQUIRED FOR ALL BLADE USE. You must read and understand the Operator's Manual and
Trimmer/Brushcutter Safety Manual before installing or using this kit. Failure to follow all instructions, or operation
without specified shield, handle, and harness, can result in serious personal injury. The type of blade used MUST
be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades
MUST be sharp. Dull blades increase the chance of kickout and injury to yourself and bystanders.
:
FOR MODEL
Model
SRM-251, 251SB
SRM-251E
KIT CONTENTS
1.
Offset U-Handle w/Throttle Handle
Assembly and Upper U-Handle Bracket*
2.
Lower U-Handle Bracket
3.
Lower U-Handle Bracket Clamp
4.
5 mm x 30 mm Hex Socket Bolt
w/Lockwasher and Flat Washer (3).
5.
8 mm x 55 mm Long Hex Head Bolt
6.
8 mm Flat Washer
7.
8 mm Square Nut
8.
Plastic Cable Clamps (2)
9.
Harness Ring w/Clamp and Screw
10. Shoulder Harness w/Quick-release Hook
11. Hip Pad
*U-Handle, Throttle Handle Assembly, and
Upper Clamp have been pre-assembled.
X7502233900
I
NSTALLATION
U-H
ANDLE
WARNING
DANGER
Serial Numbers
08001001-10999999
1*
3
2
I
NSTRUCTIONS
K
,
P/N 99944200665
IT
5
6
4
7
9
8
1*
10
11
X750008180
04/05
Tabla de contenido
loading

Resumen de contenidos para Echo 99944200665

  • Página 5 INSTRUCCIONES PARA LA INSTALACION DEL CONJUNTO DE CONVERSION DE LOS AGARRADORES-U N/P 99944200665 ADVERTENCIA PELIGRO SE DEBE INSTALAR LA EMPUÑADURA EN U AL USAR LAS HOJAS DESBROZADORAS O DE DESMONTE. SE REQUIERE EL PROTECTOR DE METAL PARA TODAS LAS APLICACIONES DE LA HOJA. Se debe leer y entender el manual del operador y el manual de seguridad para la recortadora/desbrozadora antes de instalar o usar este juego.
  • Página 6: Instalacion Del Conjunto De Conversion De Los Agarradores

    INSTRUCCIONES PARA LA INSTALACION DEL CONJUNTO DE CONVERSION DE LOS AGARRADORES-U INSTALACION DEL CONJUNTO DE CONVERSION DE LOS AGARRADORES Herramientas requeridas: Destornillador, llave Hex de 4 mm, llave de 19 mm. Piezas necesarias: Empuñadura en U , Anillo del arnés con abrazadera y tornillo, Soporte inferior de la empuñadura en U, Abrazadera del soporte inferior de la empuñadura en U, la tuerca...
  • Página 7 INSTRUCCIONES PARA LA INSTALACION DEL CONJUNTO DE CONVERSION DE LOS AGARRADORES-U 12. Instale los agarradores en el asiento del helice, coloque el tope del collar sobre los agujeros y asegure con (1) tornillo de 8mm x 55mm y la arandela grande circular (N). No apriete el perno con seguridad antes de terminar los ajustes finales.
  • Página 8: Equilibre Y Ajuste La Unidad

    MANUALES DE REPUESTO: Se puede obtener los manuales del operador, piezas y seguridad de ECHO, o se puede descargar gratis del sitio web de ECHO. Asegúrese de que sepa el número de modelo y el número de serie de su unidad...

Tabla de contenido