How To Vacuum - Dirt Devil M7003 Manual De Instrucciones

2 Use
2.1 Assemble appliance and adjust nozzles to surface
2 Use
1
click! click!
6
WARNING:
Risk of injury! Only attach the appliance parts when the appliance is not
connected to the power supply. Otherwise the appliance might start up
and parts of your body, hair or pieces of clothing might be sucked in.
CAUTION:
Before assembling, make sure that the fitted nozzle suits the surface to
be cleaned. Do not clean e.g. any floors or objects with a brush with
rotating bristles that you would not clean without a second thought with
a conventional brush. Also observe the flooring manufacturer's recom-
mendations.

2.2 How to vacuum

11
WARNING:
Risk of injury! Check appliance and power cord before each use. A
damaged appliance must never be used.
CAUTION:
Only use the appliance with all filters undamaged, in dry condition and
correctly fitted. Make sure that no objects obstruct the telescopic tube,
the suction hose or other openings.
1. Pull the cable out of the appliance (Fig. 11) and plug into a socket.
WARNING:
Danger of electric shock! If the red marking shows, retract the power
cord by pressing the retraction button ( ) to pull in the cord up to the
yellow mark (Fig. 12) again.
2. Switch on the appliance using the on/off switch ( ) (Fig. 13).
12
2
7
12 13
3 4
9
8
NOTE:
You might have to twist the parts when connecting them so they are
securely in place. Check installed parts for a secure fit by trying to pull
them apart.
1. Assemble the appliance and accessory parts depending on the surface
you want to vacuum clean (Fig. 1 – 10).
2. Ensure that the bypass vent is closed (Fig. 6).
3. For carpets, set the floor nozzle as indicated in Fig. 8.
4. For hard floors it is recommended to set the floor nozzles as indicated in
Fig. 9 or to use the optionally enclosed parquet brush (Fig. 10).
14
3. Set the power to the setting that corresponds to the cleaning task (Fig. 14).
NOTE:
When vacuuming the bypass vent (Fig. 6) must be completely closed.
With its help you can quickly reduce the suction power, to release
objects (such as curtains) that have been sucked in.
4. Vacuum dust (Fig. 15).
WARNING:
Risk of injury! Especially when vacuum-cleaning stairs make sure that
you always stand on a higher level than the appliance.
NOTE:
Your vacuum cleaner has an integrated protective function that triggers
before the appliance can overheat (e.g. due to blocked suction paths or
a full dust filter bag),
5
optional
option
optioneel
opcional
opzionale
opsiyonel
optional
option
optioneel
opcional
opzionale
opsiyonel
10
15
Chapter 4.1, 'Before you send in the appliance'.