Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Preparatory work
Getting to know the appliance
Fig.
:
dust bin;
cord rewind button;
1
1
2
haust filter cover;
suction hose connection;
4
dust bin release;
dust bin handle;
5
6
bin cover;
ON/OFF button;
8
et;
connection cord;
suction hose;
10
11
bypass vent;
suction hose release;
13
14
ic tube;
telescopic tube release catch;
16
ry bracket;
switchable floor nozzle;
18
zle;
furniture brush;
mini turbo nozzle
20
21
Unpacking and assembling
Check that the unpackaged contents are com-
1
plete. If you notice any transport damage or if an-
ything is missing, contact your dealer immediate-
ly.
Connect suction hose and appliance (Fig.
2
Connect the suction hose with the telescopic tube
3
and adjust the length of the telescopic tube (Fig.
Connect telescopic tube and switchable floor noz-
4
zle (Fig.
4
).
Ensure that the bypass vent (Fig.
5
is completely closed.
Using the accessories
CAUTION!
For hard floors, only use the switchable floor
nozzle (Fig.
/
) with the brush (Fig.
1
18
tended, as the hard floor may otherwise become
damaged.
CAUTION!
If using the turbo nozzle (Fig.
that the surface can withstand the rotating brush
without becoming damaged.
NOTE:
You can also use the suction nozzles without the
telescopic tube as necessary. To do so, connect
the required accessories directly to the handle
(Fig.
).
9
Connect the required accessory to the handle or
1
the telescopic tube (Fig.
).
9
accessory is securely connected. ➔ The appliance
can be connected.
All manuals and user guides at all-guides.com
EN
Connecting the appliance
ex-
3
dust
7
parking brack-
9
handle;
12
telescop-
15
accesso-
17
crevice noz-
19
sert the plug into a mains socket.
Vacuum cleaning
Flexible vacuum-cleaning
cessories" on page 17.
2
).
>"Connecting the appliance" on page 17.
on the appliance, press the ON/OFF button (Fig.
3
).
➔ The appliance vacuums at full suction pow-
er.
1
/
)
13
pass vent as required >"Regulating the suction pow-
er" on page 17.
the ON/OFF button again (Fig.
switches off.
that the appliance operates with full suction power
when vacuum-cleaning the next time.
) ex-
10
Regulating the suction power
open (Fig.
the bypass vent closed again (Fig.
Storing the appliance
1
/
), make sure
21
socket.
until the cord has been fully rewound (Fig.
(connected to the telescopic tube or handle) in the
parking bracket (Fig.
Make sure that the
2
CAUTION!
If the red marking is visible (Fig.
the connection cord by pressing the cord rewind
button to pull in the cord up to the yellow mark
(Fig.
6
/
) (Fig.
7
). Otherwise, the connection
2
cord might be damaged.
Pull the cable out of the appliance (Fig.
1
Connect the required accessories >"Using the ac-
1
Connect the appliance
2
To reduce the suction power, open the by-
4
To switch off the appliance, press
5
Close the bypass vent (Fig.
6
To reduce the suction power, slide the bypass vent
1
).
To increase the suction power, slide
11
2
NOTE:
If necessary, use the accessories mount (Fig.
to attach 2 accessories.
Switch off the appliance and pull the plug from the
1
Push the cord rewind button (Fig.
2
Hang the telescopic floor nozzle or parquet nozzle
3
1
/
) (Fig.
9
17
/
), retract
6
1
).
In-
5
2
To switch
3
8
).
). ➔ The appliance
8
1
/
) so
13
).
11
/
)
1
17
1
/
)
2
).
7
12
).
Tabla de contenido
