Craftmade ELLINGTON E-BEL52BNK3CRW Guia De Instalacion página 6

5. Fan Assembly. (cont.)
With the hanging bracket secured to the
outlet box and able to support the fan, you
safety cable loop
wood
are now ready to hang your fan. Grab the fan
ceiling
firmly with two hands. Slide downrod
joist
through opening in hanging bracket and let
wood screw
hanging ball rest on the hanging bracket.
and washer
Turn the hanging ball slot until it lines up
with the hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging
ball with tab in hanging bracket may result
hanging bracket tab
in serious injury or death.
canopy
hanging ball slot
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the
fan up to you once you are set on the ladder.
Find a secure attachment point (wood
motor housing
ceiling joist highly recommended) and
secure safety cable. It will be necessary to
use a heavy duty wood screw, washer and
lock washer (not supplied) with the safety
cable loop. If necessary, adjust the loop at
the end of the safety cable. The loop at the
end of the safety cable should just fit over
page 5