Kitchen Timer and Control Lockout
K
ITCHEN
T
IMER
1
2
3
4
5
6
7
8
9
0
S
TART
The KITCHEN TIMER can be set
from 1 minute to 24 hours.
This timer does not control oven
operations.
C
LEAR
O
FF
To Set the Kitchen Timer
Touch KITCHEN TIMER.
For double wall oven models only,
touch UPPER OVEN or LOWER OVEN
to select the timer for the desired
oven.
Touch the numbers until the
amount of time you want shows
in the display. For example, to set
2 hours and 45 minutes, touch 2, 4
and 5 in that order.
Touch START.
If the set time or the remaining time
is greater than or equal to one hour,
the screen will show hours and minutes
[HH: MM]. The letters "H" and "M"
will appear to indicate that the time is in
hours and minutes. (If one or more
hours was set, the screen will not start to
show the time counting down until one
minute has passed.)
If the set time or the remaining time is
less than one hour, the screen will show
minutes and seconds [MM : SS]. The
letters "M" and "S" will appear to indicate
that the time is in minutes and seconds.
Control Lockout
Your control will allow you to lock out the touch
pads so they cannot be activated when touched.
NOTE: On double oven models, this activates the
feature for both ovens.
To lock/unlock the controls:
Touch the CLEAR/OFF pad for
3 seconds, until the screen shows
CONTROL LOCKED OUT.
To unlock the control, touch the
CLEAR/OFF pad for 3 seconds, until
the home screen appears.
When the timer reaches :00,
the control will beep 3 times
followed by one beep every
6 seconds until KITCHEN TIMER
is touched.
The tone can be canceled by following
the steps in the Options-Settings section
under Sound/Volume.
To cancel the KITCHEN TIMER(s), touch
PUSH TO CANCEL TIMER.
To reset the KITCHEN TIMER(s),
touch PUSH TO CANCEL TIMER and set
a new time.
When this feature is on and the touch
pads are touched, the control will beep
and the display will show CONTROL
LOCKED OUT.
NOTES:
s
The control lockout mode affects all controls
except for the CLEAR/OFF pad. No other
touch pad will work when this feature is
activated.
s
The adjustment will be retained in memory
after a power failure.
ge.com
21