Operations; How To Set The Appliance For Surface Cooking - Samsung NZ36R5330R Serie Manual De Usuario

Operations

How to set the appliance for surface cooking

CAUTION
•
The surface elements may be hot even when off and burns can occur. Do not
touch the surface elements until they have cooled down sufficiently.
• At high or medium-high settings, never leave food unattended. Boilovers cause
smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
Single surface unit control knob (left rear, left front, right rear, right
front)
2
1
NZ36R5330R_AA_DG68-01139A-00_EN.indd 15
1. Push the knob in.
2. Turn in either direction to the setting
you want.
• At both the off and high settings, the
knob clicks into position.
Dual surface unit control knob (center)
The dual surface unit features an inner and outer element. You can select 1 or 2
elements (Single or Dual) depending on the size of the pot or pan you are using.
[ ] indicates the single power zone, and [ ] indicates dual power.
1. Push the knob in.
2. Turn in either direction to the setting
2
1
NOTE
If you remove the knobs for cleaning, make sure to re-attach them in the correct
orientation. (Refer to the illustrations on the previous page.)
CAUTION
• Please note: The operation of a control knob may not synchronize with the
actual operation of the radiant element if there is a problem with the cooktop.
• The area on the knob between the high and off settings is not appropriate for
cooking.
you want.
• To use the single surface unit, turn
the control knob to the [ ] single
element setting.
• To use the Dual surface unit, turn the
control knob to the [ ] dual element
setting.
English 15
2019-04-19 10:19:14