Powermate PRTT196E Manual Del Operador página 14

Operation
(Continued)
• Save all instructions
G
Drive Safety Control Levers
CAUTION
Do not operate both ˝FORWARD˝ and ˝REVERSE˝ drive safety control levers at the same time.
This information is provided here only to introduce the controls. Do not start the engine at this time. Starting and operating instructions
are given on page 11. Please read this section and all operating and safety instructions before starting your tiller.
• As a safety precaution, the drive safety control levers will not lock in the forward or reverse position.
WARNING
Do not fix the forward or reverse drive levers in the drive position by any other means than manually using your right hand. Do not tie or
otherwise secure the levers in the drive position.
• To stop the wheels and tines at any time release the drive safety control levers or release the reverse handle.
FORWARD LEVER (See Figure 9)
Engages wheels and tines into forward. Pushing down
the drive safety control lever (FORWARD) toward the
handlebar engages the wheels and tines. Releasing the
lever stops the wheels and tines and brings the tiller to a
complete stop.
Forward Lever
Engaged
Questions? Call Toll Free at 1-800-737-2112
REVERSE LEVER
Engages wheels and tines into reverse.
Pulling the drive safety control lever (REVERSE) toward
the handlebar reverses tiller.
Releasing the lever stops the wheels and tines.
Figure 9
13
(See Figure 10)
Reverse Lever
Engaged
Reverse Lever
Copyright © 2012 MAT Engine Technologies, LLC
Figure 10