CLEANING THE POINT OF INJECTION –
SAFETY INFORMATION
NOTICE: Indicates special instructions or general mandatory action.
NOTICE: Pumps are supplied with an injection fitting or check valve. All allow the
extension tip to be installed in the center of the pipe directly in the flow of water to
help reduce deposit accumulation.
injury, or property damage if ignored.
This is the safety alert symbol. When displayed in this manual or on the
equipment, look for one of the following signal words alerting you to the
potential for personal injury or property damage.
Use caution and bleed off all resident system pressure prior to attempting service
or installation.
Use caution when disconnecting discharge line from pump. Discharge line may be
under pressure. Discharge line may contain chemical.
To reduce risk of exposure, the use of proper personal protective equipment is
mandatory when working on or near chemical metering pumps.
USA and Canada 800.683.2378, International 904.641.1666
Warns about hazards that CAN cause death, serious personal
HAZARDOUS PRESSURE/CHEMICAL EXPOSURE
S Fixed & Variable Series
35