Connecting An Electric Latch Or Lock; Using The Videophone; Controls On The Videophone; Monitor - Extel Entry Instrucciones De Uso

Important :
• For the wiring diagram please consult the label on the back of the monitor and the back of the video camera.
b. Connecting an electric latch or lock
(fig. 6)
Connect the lock directly to terminals 5 and 6 on the back of the video camera (no colour coding).
Note that this function is only available when the screen is displaying the video from out-
side.
Important: The strike plate or electric lock that you are about to install must have a mechanical memory, like
all EXTEL products. For wiring, see the label on the back of the camera.
c. Connecting a gate motor
(fig. 6)
Directly connect to contacts 3 and 4 on the back of the camera. The camera delivers a "dry" contact with no
current, to be connected to the "push button" control of your automatic opener.
Note that this function is only available when the screen is displaying the video from out-
side.
6. USING
a. Using the videophone
• Pressing the button on the street unit triggers an audible alarm and switches on the monitor for approximately
30 seconds. When the visitor has been identified, press the button to talk.
Note: The
button only needs pressing once to communicate with the street unit.
• When the conversation is finished, wait for the end of the time-out for about 2 mins. or press the or key
to turn the monitor off.
• Prolonging the image :
To prolong the image a further 60 seconds, press the button.
• Activating a latch:
The latch or lock is activated when the button is pressed.
• Activating an automatic control:
To activate an automatic control, press the button.
It should be noted that the opening functions are only valid when the screen is switched on.
The image disappears briefly when the command is transmitted.
b. Controls on the videophone
(fig.2)
4 controls are located on the side of the monitor:
• Melody select (12)
• Melody volume control (15)
• Colour control (14)
• Brightness control (13)
7. TECHNICAL CHARACTERISTICS
a. Monitor
(MN ENTRY)
• Reference: 810301
• Power supply: 17 V
• Consumption: 7.65 W (450 mA)
• Screen: 4" - 10 cm
• Resolution: 320 x 240
• Size (mm): 128 x 130 x 17
CFI EXTEL ENTRY - 11/2016
GB4