Care And Maintenance - Utilitech HVT-8H Manual De Instrucciones

OPERATING INSTRUCTIONS
Controlling the Fan Speed
This fan comes fully assembled. There is no need for additional
assembly before use.
The speed control knob/selector switch is located on the rear grille.
Place fan on a dry, level surface. Plug it into a 120V AC electrical
outlet.
To operate, turn the rotary knob switch to the appropriate speed
option: 0=Off,

CARE AND MAINTENANCE

TO CLEAN: Always disconnect the power cord from the electrical
outlet when cleaning your fan. Light accumulated dust can be
removed by using a soft cloth to wipe away the dust at the back
grille of the fan. Wipe the exterior surfaces of the fan occasionally
with a damp cloth (not dripping wet) and dry thoroughly with a soft
dry cloth before operating the fan. Do not use harsh cleaners or
materials to clean this unit, doing so will cause damages to it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR
OF THE FAN AS THIS COULD CREATE A FIRE OR ELECTRIC
SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED
FOR LIFE AND WILL REQUIRE NO FURTHER LUBRICATION.
NO OTHER USER MAINTENANCE IS REQUIRED OR
RECOMMENDED. IF SERVICE IS REQUIRED, SEND YOUR FAN
TO THE AUTHORIZED SERVICE FACILITY.
=Low, =Medium, =High.
6