Transport
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during
transport.
When transporting by hand
Pull the appliance by its transport han-
dle.
When transporting in vehicles
Empty detergent tank.
Secure the appliance against shifting
and tipping over.
Storage
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when
storing it.
Storing the Appliance
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.
Park the machine on an even surface.
Insert the trigger gun in its holder.
Engage the spray lance in its compart-
ment.
Stow away the mains cable, the high-
pressure hose and accessory on the
appliance.
Frost protection
ATTENTION
Appliances and accessories that are not
completely drained can be destroyed by
frost. Completely drain appliance and ac-
cessories and protect them against frost.
To avoid damage:
Completely drain all water from the appli-
ance: Switch the appliance on with de-
tached high pressure hose and detached
water supply (max. 1 minute) and wait,
until no more water exits at the high pres-
sure connection. Turn off the appliance.
Store the appliance and the entire ac-
cessories in a frost free room.
Care and maintenance
DANGER
Risk of electric shock.
Prior to all work on the appliance,
switch off the appliance and pull the
power plug.
Clean the sieve in the water
Clean the sieve in the water connection
regularly.
Remove coupling from the water con-
nection.
ATTENTION
The sieve must not be damaged.
Pull the sieve out using flat pliers.
Clean the sieve under running water.
Reinsert the sieve into the water con-
nection.
Cleaning the detergent filter
Prior to longer periods of storage, e.g. in
the winter:
Remove filter from suction hose for de-
tergent and clean under running water.
Troubleshooting
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
DANGER
Risk of electric shock.
Prior to all work on the appliance,
switch off the appliance and pull the
power plug.
Appliance is not running
Pull on the lever of the trigger gun; the
device will switch on.
Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the mains supply.
Check the mains connection cable for
damages.
– 9
EN
connection
9