Lid Removal - Haier HFC9204ACW Manual De Instalación Y Del Usuario

FREEZER CARE

Lid Removal

The lid is heavy. Use both hands to secure the lid before lifting.
If it is necessary to remove the lid, follow these steps:
1. Remove each upper hinge cover by grasping on the sides and pulling
upwards. Remove each lower hinge cover by grasping on the sides and
pulling down.
2. Open the lid to the maximum position. (The hinges are loosest at this
position.)
3. Loosen, do not remove, the 4 screws
from the lower part of the hinge that
are mounted to the cabinet.
4. Raise/lift the lid until the screws align
with the larger slotted openings in the
bottom of the hinge. Each hinge is still
attached to the lid with 4 screws.
5. To reinstall lid follow steps in reverse.
Tighten all hinge screws but avoid
over-tightening to prevent stripping.
Reinstall hinge covers.
49-60813
CAUTION
LIFTING HAZARD
CAUTION
HINGE SPRING UNDER TENSION
Upper Hinge
Cover
Lower Hinge
Cover
Hinge
screws
to be
loosened
Hinge
screws
to be
loosened
17