Cleaning The High Pressure Filter - Titan IMPACT 1040T Instrucciones De Uso

CLEANUP
6.6
CLEANING THE HIGH-PRESSURE FILTER
Follow these steps if you used an accessory filter
i
(sold separately).
Clean the filter cartridge regularly. A soiled or
i
clogged high-pressure filter can cause a poor
spray pattern or a clogged tip.
1. Turn the pressure control knob counterclockwise to minimum pressure.
2. Move the PRIME/SPRAY valve down to its PRIME position.
3. Switch the unit OFF.
Unplug the power plug from the outlet.
4. Unscrew the filter housing (Fig. 12, Item 1). with a strap
wrench.
5. Pull the filter cartridge (2) from the bearing spring (3).
6. Clean all the parts with the corresponding cleaning agent.
If necessary, replace the filter cartridge.
7. Check the O-ring (4), replace it if necessary.
8. Place the bearing ring (5) against the bearing spring (3).
Slide the filter cartridge (2) over the bearing spring.
9. Screw in filter housing (1) and tighten it as far as possible
with the strap wrench.
1
2
18
5
3
4
IMPACT 1040T