Feature Details - Klein Tools MM1300 Manual De Instrucciones

J
D
G
F
E
C
B
A. Do not attempt to measure more than 1000V.
B. Do not attempt to measure more than 400mA.
C. Do not attempt to measure more than 10A.
D. Auto Power-Off (Apo)
• Device will power off after 30 minutes non-use.
• Press the select button to wake.
• Disabled during Max/Min function.
• Holding Select button while turning on disables Auto Power-Off.
E. Select Functionality Button
• Switch between AC and DC.
• Switch between "Ω", "
• Switch between Hz and %.
• Switch between °F and °C.
• Wake meter during Auto Power Off.
F. Relative Reading Mode
• Press to store current value.
• Display will now show the difference between the stored and live
readings.
• Press again to return to live reading.
G. Auto / Manual Range
• Press repeatedly to cycle through manual ranges.
• Press for 2 seconds to return to auto ranging mode.
• AT is displayed on LCD only during auto ranging mode.
H. Max/Min Hold
• Press to enter Max/Min mode; the largest and smallest values will
be saved while in this mode.
• Press repeatedly to alternative between the maximum and
minimum readings.
• Press for 2 seconds to return to live reading and clear the stored
maximum and minimum values.
I. Hold / Auto Hold / Backlight
• Hold captures the current displayed value.
• Auto Hold captures the fi rst stable displayed value, until a new
stable value is measured. The meter will then capture the new value
and emit a beep (V, Ohm, Temperature and Amp functions).

FEATURE DETAILS

" and " ".
L
M
H
I
K
A