Velleman VDPLW1308BI Manual Del Usuario
Velleman VDPLW1308BI Manual Del Usuario

Velleman VDPLW1308BI Manual Del Usuario

8 focos led incorporados con controlador dmx
Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

VDPLW1308BI – 8 BUILT-IN LED SPOTS WITH DMX CONTROLLER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDPLW1308BI! This LED colour system contains a control unit and 8 lighting fixtures. The
device was designed for easy installation, multi-purpose hanging, safe, energy-efficient and long-life operation. There
is an acrylic filter in front of the LED bulbs to soften the lighting effect. If the device was damaged in transit, do not
install or use it and contact your dealer. This system includes 8 LED spots, 4 x 6m DC/signal cables, 4 x 3m DC/signal
cables, 1 controller/DMX interface and this manual. Please read the manual thoroughly before bringing this device into
service.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Lamps and mechanical wear are not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. General Guidelines
• This device is designed for professional use on stage, in discos, theatres, etc. The VDPLW1308BI should only be
used indoors with an alternating current of max. 230VAC / 50Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat (see "Technical Specifications"), dust and
moisture. Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
VDPLW1308BI
1
VELLEMAN
Tabla de contenido
loading

Resumen de contenidos para Velleman VDPLW1308BI

  • Página 19: Vdplw1308Bi - 8 Focos Led Incorporados Con Controlador Dmx

    Si tiene dudas, contacte con las autoridades locales para eliminación. ¡Gracias por haber comprado el VDPLW1308BI! Este sistema de iluminación con LEDs contiene una unidad de control y 8 aparatos de iluminación. El aparato ha sido diseñado para una fácil instalación de diferentes maneras y le ofrece un uso seguro, un ahorro de energía y una larga duración de vida.
  • Página 20: Conexión E Instalación

    • Por razones de seguridad, las modificaciones no autorizadas del aparato están prohibidas. • Utilice sólo el VDPLW1308BI para las aplicaciones descritas en este manual a fin de evitar p.ej. cortocircuitos, quemaduras, descargas eléctricas, explosión de la lámpara, etc. Un uso desautorizado puede causar daños y anula la garantía completamente.
  • Página 21: Funciones Del Panel Frontal Y Trasero

    • Seleccione la velocidad del chase de 0-500 pasos por minuto d. Ajuste manual del RGB Pulse la tecla para acceder al menú RGB. Pulse F/S para seleccionar el color, utilice UP y DOWN para seleccionar los valores. VDPLW1308BI VELLEMAN...
  • Página 22: Funcionamiento Dmx

    DMX. Para poder recibir una señal DMX, conecte el controlador incorporado con un cable DMX de 3 polos al controlador DMX. Para mezclar los colores RGB con DMX, desactive (“OFF” (0)) el canal 1 VDPLW1308BI VELLEMAN...
  • Página 23: Montaje Del Aparato

    Modos DMX Modo DMX 1: Funcionamiento de 48 canales (controle cada VDPLW1308BI individualmente). Modo DMX 2: Funcionamiento de 24 canales (controle 4 juegos de 2 VDPLW1308BI). Modo DMX 4: Funcionamiento de 12 canales (controle 2 juegos de 4 VDPLW1308BI).
  • Página 24: Reemplazar El Fusible

    Reemplazar el fusible Reemplace el fusible del VDPLW1308BI como se muestra en la figura. ¡Ojo!: Reemplace un fusible fundido por otro del mismo tipo. Desconecte el aparato de la red antes de reemplazar un fusible. 5. Conexiones DMX512 a. Conexiones DMX512 Conecte un extremo del cable XLR incl.

Tabla de contenido