A SYSTEMS DMP808 Manual Del Usuario página 17

DMP808 / DMP808D
Control Panel
The control panel menu offers complete control of output
channels. This menu includes level, gain controls,
metering, and a host of other parameters that can be
edited.
Channel Name: A preselected channel name can be
viewed or edited in this screen.
Fader: The input level can be adjusted using this
onscreen fader.
Meters: The input and output signal level of the channel
can be viewed through these meters. They can be
adjusted between pre- and post-fader meters.
Gain Reduction: The gain reduction meter will provide
a real-time indication of any reduction in gain applied by
the internal DSP processes of the DMP808 (including
compressors-limiters, equalizers, etcetera).
Limiter: This button will activate the internal limiter
function for the corresponding channel.
Duck: Activate the 'ducking' feature by pushing this button. The duck function can be activated as ducker 1, ducker 2, or
off, the settings of which are decided by their respective menus.
INV: This button will invert the phase of the corresponding signal.
CH ON: This button will turn the corresponding channel on and off.
Network
When using the DMP808 remote software – either within
the local area network or through the internet – the
network settings need to be set appropriately to allow
external computers to identify and connect to it.
The IP address of DMP808 can be set via the system
hardware (rear panel) or the software (remote control
software).
Set via System Hardware
When the IP address is set via the hardware, the on
screen display will show the following:
Device Name: The name of the current device is found
here, and it can be adjusted by the user, if necessary.
IP Address: The actual IP address of DMP808 will
automatically be detected and shown here. User can
manually adjust the IP address through the rear panel.
Set via Software
Device Name: The name of the current device is found
here, and it can be adjusted by the user, if necessary.
IP Address: The actual IP address of DMP808 will
automatically be detected and shown here. User can
manually adjust the IP address through the rear panel.。
15
English