Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications; Electrical Wiring - Buffalo GF239 Manual De Instrucciones

UK
Cleaning, Care & Maintenance
• Isolate the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Error Message
Unit Beeps
E01
E02
E03

Technical Specifications

Model Voltage
GF239 230V 50Hz

Electrical Wiring

This appliance must be installed by a qualified technician.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
3
Cause
No pan or pan not suitable
for induction cooking
Unit has over heated
Pan being heated is empty,
temperature of pan is too
high
Power input has risen/fallen
below units operating limits.
Power
Current
(max.)
7000W 29.2A
Solution
Use pan suitable for induction cooking such as
Vogue Stainless Steel Range
Ensure ventilation filter (located underneath
unit) is clean and unblocked. Allow unit to
cool. If error code still appears after unit has
cooled contact a Buffalo agent or qualified
engineer.
Remove pan from unit. Allow unit to cool.
Ensure pan contains product to be heated. If
error code still appears after unit has cooled
contact a Buffalo agent or qualified engineer.
Switch off unit. Allow unit to cool. If error code
still appears after unit has cooled contact a
Buffalo agent or qualified engineer.
Power range Dimensions
(per ring) (h x w x d) mm
500 - 3500W 130 x 360 x 690
Weight
(kg)
15