Cooking; Cleaning, Care & Maintenance - Buffalo G805 Manual De Instrucciones

UK

Cooking

Connect the appliance to the mains power supply. A beep will sound and the display will briefly light
1.
up.
Place suitable cookware on to the centre of the glass plate.
2.
Note: Never place empty cookware on the appliance.
Press the On/Off
3.
Press either the HEAT
4.
corresponding indicator light comes on.
Note: If you wish to maintain a constant temperature during cooking use the TEMP
settings. To cook at a specific power level use the HEAT settings.
Press the UP
5.
changed at any time during the cooking process.
60°C / 80°C / 100°C / 120°C / 140°C / 160°C / 180°C / 200°C / 220°C / 240°C
400W / 600W / 800W / 1000W / 1200W / 1400W / 1600W / 1800W / 2000W / 2200W /
Note: The maximum cooking temperature using HEAT settings is 150°C. Exceeding this
temperature triggers an error message (see Error Message table).
Press the TIMER
6.
Press the UP
7.
minute increments up to a maximum of 120 minutes, which then counts down in 1 minute increments
Note: During cooking the time can be changed at any time. The HEAT/TEMP settings
remain unchanged.
A beep will sound when the cooking time has finished, and the appliance switches to standby mode.
8.
Cleaning, Care & Maintenance
• Disconnect from the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
3
button to turn the appliance On.
or TEMP
or DOWN buttons repeatedly to reach the desired setting. This setting can be
button. '0' appears on the display.
or DOWN buttons repeatedly to set the cooking time. The time can be set in 5
button, depending on your cooking requirements.The
2400W / 2600W / 2800W
.