Hilti SR 4-A22 Manual De Instrucciones Original página 11

▶ Observe the manufacturer's instructions regarding the handling and storage of saw blades.
2.4 Battery use and care
▶ Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li­ion batteries of the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes that still contain liquids.
▶ Do not saw into unknown materials.
3.4 Li­ion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Li­ion battery. The charge status of the Li­ion battery is indicated after one of the two battery release
buttons is short-pressed.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
*2200412*
1
2200412
Chuck (blade holder)
@
Control switch
;
Transport lock
=
Grip
%
Battery state of charge indicator
&
Battery release button
(
Battery
)
Rating plate
+
Front gripping area (hand guard)
§
AVR contact shoe
/
Saw blade :
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
English 5