HAMPTON BAY 128 597 Manual Del Propietário página 11

2. Connect the red and white wires from the
fan motor assembly with the red and white
wires from the lower housing by engaging
the 1-positioned connectors (Figure 16).
3. Position the lower housing onto the black
bracket of the fan motor assembly, align-
ing each of the four holes. Rotate the low-
er housing clockwise to engage the three
mounting screws and lockwashers with the
three key hole slots, tighten the screws. Re-
install the one mounting screw that were re-
moved in step 1 and tighten firmly.
THE LIGHT SOURCE IS DESIGNED FOR THIS
SPECIFIC APPLICATION AND CAN OVERHEAT
IF SERVICED BY UNTRAINED PERSONNEL. IF
ANY SERVICING IS REQUIRED, THE PRODUCT
SHOULD BE RETURNED TO AN AUTHORIZED
SERVICE FACILITY FOR EXAMINATION OR
REPAIR.
4. Place the glass into the lower housing, align-
ing the three flat areas on the top flange of
the glass with the three raised dimples in the
lower housing. Turn the glass clockwise un-
til it stops (Figure 17).
NOTE: PERIODICALLY
GLASS SHADE IS SEATED FULLY CLOCK-
WISE IN THE LOWER HOUSING.
Flat Area
CHECK THE
Lower Housing
Raised Dimples
Glass
Figure 17
9.