Makita DCL184 Manual De Instrucciones página 9

1. Unfold the entrance of the paper filter before
setting it on the dust stopper.
2.
Insert the protrusion of the paper filter into the
groove on the dust stopper as shown in the figure.
The paper filter does not have distinction between the
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
2
► 1. Dust stopper 2. Groove 3. Paper filter
3. Overlap the frame of dust stopper with that of the
paper filter.
1
3
4. Place the dust stopper and the paper filter together into the
cleaner cavity in the same direction of arrow on the dust stopper.
Insert them all the way into the slots in the cleaner cavity.
1
► 1. Slot
5. Place the entire container part of the paper filter
inside the tool itself.
6. Close the dust case cover completely.
1
► 1. Dust case cover
NOTE: When the paper filter is not installed in
the cleaner, the dust case cover does not close
completely.
9 ENGLISH