Pioneer DVR-S706 Manual De Instrucciones página 12

CONNECTIONS
Connect the unit to the supplied AC adapter and connect the USB or IEEE 1394 cable.
AC adapter connection
Connect the AC adapter plug to the DC IN connector on the rear panel of the unit and
use the supplied power cord to connect the AC adapter to a wall outlet.
Do not use other than the supplied AC adapter.
Connect to wall outlet.
USB Cable Connection
This is a hot plug unit.
1. Turn on the unit.
2. Turn on the computer and start up Windows.
3. Connect the USB connector on the rear of the unit to the computer using the
supplied USB cable.
÷ Purchase a USB 2.0 board for computers without such a port. (Although connection
to a USB 1.1 port is possible, the unit will then not yield specified optimum
performance.)
Turn on the unit before connecting it to the computer.
Be sure not to disconnect it during data transfers.
Computer
Note: Do not connect the unit using both the IEEE 1394 cable and the USB cable.
12
En
Power cord
AC adapter (supplied)
USB cable (supplied)