Fanimation The Sandella MAD3260 Serie Manual De Propietario página 11

How to Assemble the Fan Blades(cont'd)
4. Connect the 2-pin connector from the socket
plate assembly to 2-pin connector from motor
assembly (Figure 21).
5. Remove one of the three screws in the plate
assembly. Slightly loosen the remaining two
screws. Assemble the socket plate to the light
plate assembly using the two key slots.
Replace the third screw and securely tighten all
three screws (Figure 22).
6. Insert light bulb into socket (Figure 23).
CAUTION
To reduce the risk of fire, use 100-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off
the wall switch and allow the bulb to cool for 10
minutes before relamping.
Bulb is pressurized and may shatter. DO NOT
TOUCH BULB WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove fingerprints
with alcohol prior to use.
7. Assemble the glass bowl to the light plate assembly.
Securely attch the glass by twisting in a clockwise
direction. Do not over-tighten (Figure 24)
Socket Plate
2-Pin
Connector
Socket Plate
Assembly
Screws (3)
Socket Plate
100-WATT
Minican
Light Bulb
Glass
11
Motor Assembly
2-Pin
Connector
Figure 21
Figure 22
Light Socket
Figure 23
Figure 24