Lamp Replacement; Warranty - Cuda surgical XLS-180 Manual De Uso

8.1

LAMP REPLACEMENT

CERMAX lamps are at high internal pressure when cold and at
operating temperature; therefore, CERMAX lamps may unexpectedly
rupture resulting in discharge of hot fragments of quartz and/or glass
and metal.
Only handle lamps with protective covers in place. Do not handle lamps
without their protective covers unless government approved safety
glasses, facemasks (with neck protector, chest protector and
gauntlets) are worn.
Always disconnect power cord and turn main switch off before lamp
replacement.
CAUTION
Take utmost care not to hit gas-seal edge of lamp; it may cause gas leaks
or lamp failure.
CAUTION
Do not touch the lamp and patient simultaneously when changing
the lamp.
CAUTION
Open lamp compartment door and pull out lamp cartridge.
Replace lamp cartridge with new unit and log the serial number and hours on the hour
meter. Close the lamp compartment door. Re-connect the power cord and turn the light
source on according to 6.1. Reset hour meter to zero by depressing hour meter reset
button on rear panel.
8.2 LIMITED WARRANTY
Your fiberoptic product(s) carry a 3-year warranty from the date of shipment on
workmanship and all defects of material, excluding replaceable sweatbands, headband,
fiberoptic cable and lamps. Should your product prove to have such defects within three
years of the shipment, ST TECHNOLOGIES
component part without charge. Should your fiberoptic product(s) need servicing under this
warranty, please contact ST TECHNOLOGIES
You should carefully pack unit in a sturdy carton and ship it to the factory. Please include a
note describing the defects, your name, telephone number and a return address. Warranty
does not cover equipment subject to misuse, accidental damage, normal wear and tear or if
transferred to a new owner without authorization from ST TECHNOLOGIES
warranty gives you specific legal rights and you may also have other rights that vary from
state to state.
®
LIT034
CUDA SURGICAL XLS-180
(English)
WARNING
will repair or replace the product or
®
for return authorization documentation.
®
Date of Revision: 02/09/17
. This
®
Rev. P
Page 10 of 72