Power Supply; Installing The Video Cable; Maintenance And Cleaning; Maintenance - Abus TVCC34010 Manual De Instrucciones

5.3 Power supply

IMPORTANT!
Before starting installation, ensure that the power supply system voltage and the rated
voltage of the camera are identical.
The cameras have a 12 V DC power supply. Ensure correct polarity when connecting. A plug-in power
supply unit (round plug, 5.5 mm x 2.1 mm) is provided for the connection.

5.4 Installing the video cable

In order to transmit the video signal to a converter, monitor, or recorder, a coaxial cable of type RG59
with BNC plug (male) must be connected to the "Video OUT" connection. The cable length to the next
device may not exceed 150 meters. Suitable signal amplifiers can be installed to increase the range.

6. Maintenance and cleaning

6.1 Maintenance

Regularly check the product's physical state, e.g. check for damage of the housing.
If you suspect that safe operation cannot be guaranteed anymore, disconnect the product and ensure
that it cannot be used by mistake. Remove the batteries.
You can assume that safe operation is not possible anymore when

the device shows visible damage,

the device does not function anymore
Please note:
The product is absolutely maintenance-free for you. There are no components on the
inside of the product to be checked or services by you, never open it.
(1) Video signal (BNC)
(2) Power supply
1
12 V DC (5.5 x 2.1 mm)
2
21
English