Note On Power Supply; Improper Function - Seiko V176 Manual Del Usuario

Ocultar thumbs Ver también para V176:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63

NOTE ON POWER SUPPLY

The battery used in this watch is a rechargeable battery, which is different
l
from ordinary silver oxide batteries. Unlike other disposable batteries such as
dry-cell batteries or button cells, this rechargeable battery can be used over
and over again by repeating the cycles of discharging and recharging.
The capacit y or recharging ef ficiency of the rechargeable bat ter y may
l
gradually deteriorate for various reasons such as long-term use or usage
conditions. Worn or contaminated mechanical parts or degraded oils may
also shorten recharging cycles. If the efficiency of the rechargeable battery
decreases, it will be necessary to have the watch repaired.
CAUTION
Do not remove the rechargeable battery yourself. Replacement of the
l
rechargeable battery requires professional knowledge and skill. Please
ask a watch retailer for replacement of the rechargeable battery.
Installation of an ordinary silver oxide battery can generate heat that can
l
cause bursting and ignition.
18

IMPROPER FUNCTION

When an abnormal display appears, follow the procedures below to reset the built-
in IC. The watch will resume its normal operation.
<HOW TO RESET THE IC>
1. Unlock the crown and buttons.
2. Pull out the crown to the second
click.
3. Keep pressing down Button A and B
for 3 seconds or longer.
4. Push the crown back into the normal
p o s i t i o n a n d c h e c k i f t h e s m a l l
second hand moves as normal.
5. S c r e w a l l t h e w a y i n u n t i l i t i s
locked.
Resetting the IC will initialize the watch. Before starting to use the watch, it will be
necessary to set the time and adjust the STOPWATCH hands to the "0" position.
Refer to "SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND
POSITION" section of this manual.
A
CROWN
B
19
Tabla de contenido
loading

Tabla de contenido