Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Solid Carbon-Steel ER70S-6
Flux Cored/Carbon-Steel E71TGX
Aluminum ER5356
Stainless Steel ER308L
4.4 Panel trasero / conector de gas
Cuando se utiliza la soldadura MIG (GMAW) Proceso de soldadura (alambre
sólido) un gas protector se requiere. Familiarícese con la ubicación de la "Panel
trasero" cónico boquilla del conector de gas antes de intentar operar.
•
Must be used with CO2 or 75%
Argon/25% (C-25) shielding gas
•
CO2 gas is economical and
provides deeper penetration
•
75% Argon/25% CO2 has less
spatter and a better bead
appearance
•
Indoor use with no wind
•
For auto body and manufacturing
fabrication
•
Welds thinner materials (22
gauge) than flux cored wires
•
No shielding gas required
•
Excellent for outdoor or windy
conditions
•
For dirty, rusty, or painted
materials
•
Hotter than solid wires
•
Welds to 18 gauge materials and
thicker
•
Must be used with Argon
shielding gas
•
Recommended to me used with
spool guns for best results
•
Harder wire for stronger welds
and easier feeding
•
Must be used with Trimix
(Helium/Argon/CO2) or spray
shielding gas
•
Used for 301, 302, 304, 305, and
308 stainless based materials
4-4A
Tabla de contenido
