Features; Assembly - RIDGID MobilAir TRI-Stack OF50150TS Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Air Tank Capacity .................................................... 5.0 gal.
Air Pressure .................................................... 150 psi max.
Air Delivery (High Flow Filter) ............... 4.9 SCFM @ 90 psi
KNOW YOUR AIR COMPRESSOR
See Figure 2, page 19.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
5 IN 1 TRI-STACK AIR COMPRESSOR
Detachable compressor tank allows for convenient
transportation and flexibility at job site.
AIR FILTERS
Easy Start Air Filter - Designed to improve starting char-
acteristics.
High Flow Air Filter - Can be used to increase your
compressor's air delivery (SCFM) when adequate electric
power is available.
HANDLES
The air compressor is equipped with handles for carrying
compressor tank in one hand and main tank in the other.

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
Air Delivery (Easy Start Filter) ............... 3.6 SCFM @ 90 psi
Gauges ..........................................................2 in. diameter
Input .............................. 120 V, AC only, 14.5 Amps, 60 Hz
QUARTER TURN DRAIN VALVES
Quarter turn drain valves are located on tanks for easy
draining of condensation to help prevent tank corrosion.
REGULATOR PRESSURE GAUGES
The current line pressure is displayed on the regulator
pressure gauges. This pressure can be adjusted by rotating
the pressure regulator knobs.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air tank pressure exceeds the preset maximum.
TANK PRESSURE GAUGES
The air compressor has two tank pressure gauges to indicate
the pressure of the air in the tanks. One is located on the
compressor tank and one on the main tank.
TWO INDEPENDENT LOCKING REGULATORS
Air pressure can be controlled separately on compressor
tank which has a regulator knob and on the main tank,
which has a separate regulator knob, for maximum utility
at the job site.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-866-539-1710
PACKING LIST
Air Compressor
Wrench
High Flow Filter
Manuel d'utilisation
9 – English
for assistance.