Cleaning And Maintenance - EuroLite LED PAR-56 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED PAR-Spots, you may now start operating these via your lighting controller.
DMX-protocol
Channel 1
Red
0 - 255
0-100 %
Channel 2
Green
0 - 255
0-100 %
Channel 3
Blue
0 - 255
0-100 %
Channel 4
Dimmer
0 – 255
0-100 %
Channel 5
Flash
0 - 10
No function
11 - 255
0-100 % with increasing speed
Blackout
In order to select Blackout, set DIP switch 10 to ON and DIP switch 1 to 9 to OFF.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
21/40
51913624_V_1_2.DOC
Tabla de contenido
loading

Este manual también es adecuado para:

Led par-64Rgb spot 10 mmRgb floor 10 mmRgb profi 10 mm

Tabla de contenido