Troubleshooting; Technical Service - Heath Zenith 6108 Manual De Instrucciones

SYMPTOM
Light does not come
on.
Light does not turn off.
Lights do not stay on
as desired.
Remote switch does
not work.
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com.
If the problem persists, call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may
also write* to:
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model Number, Date of
Purchase, and Place of Purchase.
NO SERVICE PARTS AVAILABLE FOR THIS PRODUCT

TROUBLESHOOTING

POSSIBLE CAUSE
1. Circuit breaker or fuse is
turned off.
2. If the lamp being controlled
has another switch, it may
be turned off.
3. Bulb is burned out.
4. Poor connection.
5. O N / O F F bu t t o n n o t
pushed.
6. Control may be wired
wrong.
1. Switch is being triggered
by air vent or other heat
source.
2. Motion is still present.
3. Delay set by TIME control
has not expired.
4. Control may be wired
wrong.
1. Motion has stopped in the
room.
2. TIME control is set for too
short a delay.
1. Control may be wired
wrong.

TECHNICAL SERVICE

(Do Not Send Products)
8
SOLUTION
1. Turn circuit breaker on.
2. Turn other switch on.
3. Replace light bulb.
4. Verify all wiring connec-
tions.
5. Press the ON/OFF button.
6. See Troubleshooting Wiring
Connections, page 6.
1. Move switch to other switch
location or determine the
source triggering the switch
and alter air flow.
2. Make sure there is no motion
during TIME control period.
3. Set switch TIME control to
shorter time period.
4. See Troubleshooting Wiring
Connections, page 6.
1. Continue movement.
2. Set switch TIME control to
longer time period.
1. See Troubleshooting Wiring
Connections, page 6.
598-1233-02