Tabla de contenido
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
A few seconds after connecting to the power supply, the projector is ready for operation and the operating mode that was previously selected
is activated.
SELECTING THE DMX START ADDRESS
Press the MODE button repeatedly until "Addr" appears on the display. Press ENTER, and while all four characters are flashing on the display, the
DMX start address can be set as desired using the UP and DOWN buttons (A001 - A512). Confirm the input with ENTER. The synchronous control of
multiple spotlights (same model) through a DMX control unit (e.g. DMX console) can be achieved by assigning the spotlights to an identical DMX start
address and DMX mode and connecting them using DMX cables.
-> ENTER->
ADJUSTING THE OPERATING MODE
Press the MODE button repeatedly until "MOde" appears on the display. Press ENTER, and select the desired operating mode using the UP and
DOWN buttons (DMX 2Ch, 4Ch, 12Ch, 18Ch, SLAv, AUtO, SOun). Confirm the input with ENTER. You will find tables with the channels of the different
DMX modes on the following pages of this manual.
-> ENTER->
SLAVE MODE
Connect the slave and the master unit (same model) with a DMX cable and activate one of the standalone modes (AUTO, SOUND) on the master unit.
Now the slave unit follows the master unit.
AUTOMATIC CONTROL MODE (AUTO)
Select one of the 16 different auto programs (AUt1 - AU16) and the time factor (SP00 - SP99) of the LED and barrel scenes (value SP16 = scene du-
ration approximately 1 second, SP00 = factor 0.1, SP99 = factor of 10. The higher the value, the longer the period of time until the scene changes).
-> ENTER->
MUSIC CONTROL MODE (SOUND)
Select the Music control mode, to control the effects spotlight via the built-in microphone (bass pulses). Select of the 16 different sound programs
(SOU1 - SO16) and select the desired microphone sensitivity (Se01 - Se99) as desired (Se01 = minimum sensitivity; Se99 = maximum sensitivity).
-> ENTER->
UP/DOWN
UP/DOWN
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER ->
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER ->
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
UP/DOWN
UP/DOWN
UP/DOWN
-> ENTER
<- MODE
-> ENTER
<- MODE
-> ENTER
<- MODE
-> ENTER
<- MODE
-> ENTER
<- MODE
15
Tabla de contenido
