Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Features
Front Panel
4
1
2
1.
Microphone Inputs: Connect the included dynamic microphones to these 1/4" (6.35 mm) inputs.
2.
Microphone Volume: Adjust this dial to control the volume for both microphone inputs.
3.
Master Volume: Adjust this dial to control the speaker's main mix volume, which includes the microphone inputs, Aux
input, and the audio from a paired Bluetooth device.
4.
Aux Input: Connect a smartphone, MP3 player, DVD player, computer soundcard, or other line-level audio source to
this 1/8" (3.5 mm) Aux input.
5.
Aux Volume +/-: Press these buttons to control the volume for the Aux input and Bluetooth signal.
Note: The Aux input volume will be adjusted separately from the Bluetooth volume.
6.
Bluetooth: Press this button to pair to a Bluetooth device. Press this button again to unpair from a connected
Bluetooth device.
Note: Volume on your Bluetooth device should be turned up.
7.
Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Karaoke Star Plus.
8.
Aux/Headphone Output: Connect this 1/8" (3.5 mm) output to headphones, a powered speaker, or a recorder.
9.
FX Group: Press one of the A-D buttons to select an effect category.
10.
FX Group Icon: The display will show the selected category for the built-in effects.
11.
Voice Effect On/Off: Press this button to activate/deactivate the built-in effects. The built-in effects are applied to both
microphone inputs.
12.
Voice Effect Icon: The display will show the effect preset icon when the built-in effects are activated.
13.
-/+: Use these buttons to select one of the built-in effects.
14.
Light Mode: Press this button to cycle through these different light effects:
•
Off (no lights)
•
EQ Bars (reactive to music)
•
Horizontal Color Wipe (non-reactive to music)
•
Shimmering Large Blocks (non-reactive to music)
•
Shimmering Small Blocks (non-reactive to music)
•
Falling Blocks (non-reactive to music)
•
Wavy Line (reactive to music)
•
Pulsating Block (reactive to music)
•
Light Bar (reactive to music)
•
Snowflake/Square Lights (non-reactive to music)
•
Vertical Lights (non-reactive to music)
15.
USB Charge: Connect your device's charge cable here to charge it.
Note: The USB charging port does not play music. Use Bluetooth or the Aux input to play your music source.
16.
Charge LED: Indicates battery charging status of Karaoke Star Plus.
• Blinking LED = The unit is powered on, the battery is low and needs to be recharged.
• Solid LED = The battery is charging.
• LED OFF = If the power cable is connected, the battery is fully charged. If the unit is ON with the power cable
not connected, the battery has not yet reached a low charge level.
4
6
16
16
7
5
9
8
10
10
13
13
4
3
14
14
11
11
1
2
15
15
3
Tabla de contenido
