Top Panel - ION Karaoke Party Guia De Inicio Rapido

Features

Top Panel

1. Power: Press this button to
turn Karaoke Party on or off.
2. Microphone Volume: Adjust
this knob to increase
decrease the signal gain for the
Mic 1 and Mic 2 inputs.
3. Echo: Adjust this knob to add
an echo effect to the Mic 1 and
Mic 2 signal.
4. AVC (Automatic
Control): When the
function is activated, the main
vocal on a multiplex track (split
track) is removed when the
singer begins singing into the
microphone. When the singer
stops singing, the main vocal
on the multiplex
automatically re-activated. This
is useful during
sessions when a singer is
learning a song.
Note: The AVC function only
works with multiplex
track) recordings and not with
standard audio recordings.
5. Light: Press this switch in to
activate the light effects.
6. Program: Press this button to program the track playback order. See Programming CD Track
Playback Order for more details on using this function.
7. Rep: Press this button once to repeat a single track (a blinking dot will appear near the Rep option on
the display). Press this button again to repeat the entire CD (a solid dot will appear near the Rep
option on the display). Press this button again to turn off repeat (the dot near the Rep option on the
display will disappear).
8. Mic 1: Connect the included dynamic microphone to this 1/4" (6.35 mm) input.
9. Mic 2: For duet singing, connect another dynamic microphone (sold separately) to this 1/4" (6.35 mm)
input.
10. CD Compartment: Open the CD compartment to load/remove a CD.
11. Master Volume: Adjust this knob to control the overall volume of the internal speakers and RCA
outputs from the CD audio, microphone inputs, and Aux In sources.
12. Balance: Adjust this knob to control the separation between the left and right channel signal going to
the internal speakers.
13. Play/Pause: Press this button to play or pause the CD.
14. Stop: Press this button to stop CD playback.
15. Next Track/Scan Forward: Press and release this button to go to the next CD track. Press and hold
this button to scan forward through the current track.
Note: Scan-forward will not work with CD+G discs.
16. Previous Track/Scan Backward: Press and release this button to go to the previous CD track. Press
and hold this button to scan backward through the current track.
Note: Scan backward will not work with CD+G discs.
17. Display: This screen shows the unit's current operation.
4
All manuals and user guides at all-guides.com
1
or
2
3
Voice
AVC
4
5
6
track is
7
practice
(split
10
17
8
11
12
13
14
15
16
9