Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe AXOR 460 / 300 2jet 35275000 Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
The shower may only be used for bathing, hygiene
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply the
product and has no weak points.
• The product is not designed to be used with steam
baths!
Fault
Head shower extremely leaky
4
English

Technical Data

Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!

Symbol description

Cause
- Head shower soiled / scaled
Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Flow diagram (see page 31)
Cleaning (see page 34) and en-
closed brochure
Spare parts (see page 36)
Remedy
- Clean / descale head shower
see page 34
max. 0,6 MPa
0,15 - 0,4 MPa
max. 60°C
max. 70°C / 4 min