gala gar GALA MIG 2300 ALU 4R Manual Técnico De Instrucciones página 15

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Control pannels of GALA MIG (V. Compacta) equipment.
GALA MIG 1810
C
E
GALA MIG 2300 ALU 4R
I
C
GALA MIG 2000/ 2600
C
GALA MIG 4000
I
C
E
(*)Standard Models: Optional KIT Ref 43981075.
A
Torch connection.
B
Wire speed control.
C
SPOT TIME. Spot time.
M
Welding earth connection.
GALA MIG (V. COMPACTA). Manuel d'Instructions
B
R
S
F
G
D
H
B
R
S
D
G
E
B
R
S
G
E
D
H
B
G
D
J
B - Wire speed control potentiometer.
C- SPOT TIME: Welding time control potentiometer.
D - Welding voltage selector switch.
E- Fuse-holder. (1A/250V fuse)
F- Thermal overload indicator.
G- Luminous ON/OFF switch.
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity
of the welding circuit. (*)
WARNING!:
This equipment has thermal protection against
overheating. In the event that you exceed the duty cycle of the
equipment, the light H will come on and the equipment will not be
operative. Wait until the equipment cools down appropriately. (Do not
disconnect the machine).
B - Wire speed control potentiometer.
C- SPOT TIME: Welding time control potentiometer.
D - Welding voltage selector switch.
E- Fuse-holder. (1A/250V fuse)
G- Luminous ON/OFF switch.
H- SOFT START: Initial acceleration ramp control of driving motor.
The abruptness of the start of the arc can be decreased with this,
creating a progression of the motor speed.
I- BURN-BACK: Final wire length control. It adjusts the final wire
length at the outlet from the torch.
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity
of the welding circuit. (*)
B - Wire speed control potentiometer.
C- SPOT TIME: Welding time control potentiometer.
D - Welding voltage selector switch.
E- Fuse-holder. (1A/250V fuse)
G- Luminous ON/OFF switch.
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity
of the welding circuit. (*)
B - Wire speed control potentiometer.
C- SPOT TIME: Welding time control
D- Welding voltage fine adjustment changeover switch.
E- Fuse-holder. (1A/250V fuse)
R
G- Scale switch. ON/OFF switch.
H- SOFT START: Initial acceleration ramp
motor. This permits reducing abruptness of the arc start,
S
creating a progression in the motor start-up speed.
I-
BURN-BACK: Final wire length control. It
wire length at the outlet
J- ON indication lamp.
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity
of the welding circuit. (*)
Included in GALAMIG V-I models
T 1A/250V
E
F
H
I
potentiometer.
control of driving
adjusts the final
from the torch.
Protection fuse.
Thermal overload warning light. (GALA MIG
1810)
SOFT-START: Soft control on initial arc
striking.
BURN-BACK: Final wire length control.
15
Tabla de contenido
loading

Tabla de contenido