Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Vehicle engines may be washed only if the
dirty water is disposed of as per regulations
in force:
- Intake water temperature: see data plate
on the appliance.
- Intake water pressure: below 10 bar.
- Operating ambient temperature over 0°C in
accordance with standard EN 60335-2-79/A1
only for domestic model.
IMPROPER USE
Use by unskilled persons or those who have
not read and understood the instructions in
the manual is forbidden. The introduction of
inflammable, explosive and toxic liquids into
the appliance is prohibited.
Use of the appliance in a potentially inflam-
mable or explosive atmosphere is forbidden.
The use of non-original spare parts and any
other spare parts not specifically intended
for the model in question is prohibited.
All modifications to the appliance are pro-
hibited. Any modifications made to the
appliance shall render the Declaration of
Conformity null and void and relieve the
manufacturer of all liability under civil and
criminal law.
ASSEMBLY & INSTALLATION
ASSEMBLY
WARNING: All installation and assembly
operations must be performed with the ma-
chine disconnected from the mains power
supply.
1. Follow the next sequence of pictures for
you to assembly your pressure washer.
E N G L I S H •
2. Install the lance
with gun.
3.
Connect
the
gun and hose.
4. Make the con-
nection
of
the
hose
with
the
product tank as
shown in the il-
lustrations.
Water inlet with
filter.
U se r's m a nua l
Water outlet
(to the tool).
11
Tabla de contenido
