Throttle Lever; Throttle Cable - RedMax EBZ7100 Manual De Instrucciones

F1
F2
F3 [EBZ7100RH]
[EBZ7100RH-CA]
F4 [EBZ7100RH] [EBZ7100RH-CA]
22
English
6. Set up
■ BLOWER TUBES
1. Connect the blower and swivel joint with flexible
hose. Clamp both ends of the flexible hose securely
with the hardware supplied with the unit.
2. Align the protrusion and the groove provided on the
tube ends and twist the tube until connection is
locked up.
NOTE
A light lubricant may be used to ease assembly of
flexible pipe to blower elbow.

■ THROTTLE LEVER

[EBZ7100RH] [EBZ7100RH-CA]
• Set up the clamp to the swivel and tighten the screw
on the clamp.
(1) Clamp
(2) Swivel
(3) Screw

■ THROTTLE CABLE

[EBZ7100RH] [EBZ7100RH-CA]
• Use the clamp to fasten the colgate tube containing
the throttle cable and the power cable to the hose.
(1) Clamp
(2) Cable
(3) Hose