Futurelight PSC-250 DMX-Scanner Manual Del Usuario página 40

♦ Select "AUTO" or "SOUN" by pressing [UP].
♦ Press [ENTER] for selecting the desired extension menu.
♦ Select "ALON" or "MAST" by pressing [UP].
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
Disp
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
♦ Select "VALU" by pressing [UP].
♦ Press [ENTER] to confirm; the display shows"D-00". In this setting, the DMX-adjustment of every
channel will be displayed.
♦ Press [UP] in order to select the desired channel. If you select "D-14" the display will only show the
DMX-value of the 14
♦ Press [ENTER] to confirm.
♦ The display shows"DXXX", "X" stands for the DMX-value of the selected channel.
♦ Press [ENTER] or [EXIT/DN] to exit.
rDis
- Reverse display
With this function you can rotate the display by 180°.
♦ Select "rDIS" by pressing [UP].
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't; the display will
rotate by 180°.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Shut off LED display
With this function you can shut off the LED display after 2 minutes.
♦ Select "CLDI" by pressing [UP].
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] or [EXIT/DN] to exit.
Lamp
- Main menu 1
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
th
channel.
40/90 51839915X18NXS_V_1_1.DOC