cecotec HidroBoost 1400 EasyMove Manual De Instrucciones página 19

• To ensure a safe operation, use only original spare parts
provided or approved by Cecotec.
• Use only the nozzle supplied with this machine.
• Never leave the high-pressure hose unattended while the
machine is running.
• Always hold the high-pressure hose and gun firmly when
starting and operating the machine.
• Never allow the unit to run with the trigger released (off)
for more than one minute, this could cause damage to the
pump.
• The device is not designed to pump hot water. Do not
connect it to a hot water supply as it will significantly reduce
the pump's service life.
• The machine is not suitable for connection to potable water
mains.
• Make sure the inlet water pressure is between 0.01 MPa
and 0.4 MPa and the inlet pipe should at least 5-metre long.
• If the machine is going to be connected to a safe drinking
water mains, install a backflow preventer in the water
pipe to prevent dirty water flow back to the drinking water
system. The backflow preventer shall comply with EN
60335-2-79 ANNEX A.
• This appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit
that is regularly switched on and off.
• Release the trigger when changing from high to low
pressure modes.
• Keep the high-pressure hose away from sharp objects.
Bursting high-pressure hoses may cause injury. Examine
the high-pressure hose regularly and replace it if damaged.
Do not attempt to mend a damaged high-pressure hose.
• To reduce the risk of electrocution, keep all connections dry
HIDROBOOST 1400 EASYMOVE
ENGLISH
19