Idiomas disponibles
Idiomas disponibles
Trim trap
The optional trim trap <A> holds the trimmed
fabric and thread produced when sewing.
<A>
To install:
Insert the trim trap <A> until it contacts the front cover.
NOTE:
Be sure to position the positioning guide <B> to the one
on the machine.
To remove:
Slowly pull out the trim trap.
NOTE:
The optional trim trap can also be used as the foot
controller holder.
CAUTION
Always remove the foot controller from the trim
trap when carrying the machine.
Free-arm sewing (removing bed extension)
Free-arm sewing enables tubular pieces to be sewn
more easily.
1. Remove the bed extension <A>.
<A>
NOTE:
Be careful not to lose the removed bed extension.
<B>
2. Position the fabric, and start sewing. (See CHAPTER
5.)
Wide table
Using the wide table <A> makes the large piece sewing
easy.
To install:
Attach the wide table <A> by pushing it in the direction
of the arrow until the edge line 1 is aligned to the line
2 of the bed extension <B>.
<B>
<A>
To remove:
To remove the wide table <A>, lift up the machine a little
and then pull out the wide table <A> in the direction of
the arrow.
<A>
NOTE:
Do not move the machine while the wide table <A> is
attached, otherwise damage or injuries may occur.
2
1
5
Capítulos
